A big thanks to Russ over at the AIR Users Blog for linking to trikome.com! Welcome AIR Users!
January 14, 2010
October 26, 2009
October 25, 2009
Here’s a bunch of drums courtesy the AIR Users Blog.. theres tons of samples and Structure patches on the site so check em out
As folllow up on my previous post regarding using FLStudio as a MIDI controller, here’s a template so you can use FLStudio’s step sequencer to control Boom in Protools. Boom has a step sequencer, but it is limited to 4 beats per pattern and only 16 patterns. You can trigger the individual drum sounds via MIDI, but the notes are assigned in a somewhat random way. This template makes it much easier to program in grooves longer than 4 beats and also arrange various patterns.
This template uses the Protools 8 Dashboard and needs a virtual midi cable installed to work properly.. it’s set up to use Port 1 of FLStudio. Unzip into a folder inside of FLStudio\Data\Projects\Templates\
Download Boom Step Sequencer
Downloaded 343 times
Don’t own FLStudio? Save 10% off the purchase price. The features required to control Boom are in all versions of FLStudio.
October 23, 2009
Using this dashboard with FLStudio, one can control Protools just like a hardware MIDI controller. This means one has the ability to record MIDI note and automation data from FLStudio directly into Protools. In addition, one can control the dashboard with other hardware controllers, easily allowing any controller to be integrated into Protools.
August 24, 2009
Here’s a useful template for those who are into rewiring FLS into other hosts. I like to bounce out of FLS directly into protools via rewire, but one thing that was bugging me was the fact that FLStudio doesn’t support mono tracks. I did some research and it seems using the Fruity Mute plug in is the best option since it doesn’t affect levels like the pan and stereo separation knobs. I set up the mute plug in for the mono channels in the template so it’s easy to just assign the tracks.
The first 10 mixer tracks correspond to FL1 – FL10 in your rewire host and should be used on stereo busses. Tracks 11 – 20 are assigned to rewire busses FL11 – FL15, and are split into mono busses.
The Master track is routed to rewire bus FL16 as a stereo bus. But think of the master as only the “preview” bus — I disabled the routing of assigned audio to the master because the mono output doesn’t sound right being run though the FLS mixer. Unassigned audio will go to FL16, as will sample browser previewing.
Downloaded 376 times
Unzip into a folder inside of FL Studio\Data\Projects\Templates\
If you load up the template while in rewire mode, the next time you reopen FLS in rewire, it will start with this template.